Resending (Restored Transmission); Confirming Reserved - Konica Minolta FK-102 User Manual

Resending (Restored transmission)

When memory transmission is selected, documents sent to a remote unit that is busy or other-
wise unavailable will be stored in memory for a fixed period of time, and the Re-Tx icon will be
indicated on the JOB LIST screen. Documents stored in memory can be selected and sent
again either to the same remote station or to a different remote station.
FOR DETAILS
•
Restored transmission is only possible when memory transmission is set.
•
Transmission documents are not stored in memory when a transmission has been can-
celed by pressing [STOP/CLEAR] during transmission.
•
The restored transmission setting of Key Operator mode must be set to ON in order to store
documents that were unable to be sent for a fixed period of time in memory.
The amount of time documents are stored in memory can be selected among four levels
of 12, 24, 48 and 72 hours. For details, see "Setting up retransmission" (p. 10-38).
The restored transmission setting is set to OFF at the time of purchase.
1.
Press [FAX] on the control panel to display the FAX Basic
screen.
2.
Press [CHECK] on the control panel.
Operation During Transmission - (continued)
2
Transmission
0
Simple FAX
Transmission
Placing the
Original on the
Machine
Setting
Transmission
Conditions
Selecting a
Remote Station
Operation
During
Scanning
Operation
During
Transmission
Reserving
Transmission
Manual
Transmission
Canceling
Transmission
Confirming
Reserved
Documents
Confirming
Communica-
tion Results
Memory
Transmissions
Total page set
Timer
Transmission
International
Communication
Sender
Information
2-25