Table of Contents
Advertisement
9.5. SERVOMOTOR INSTALLATION AND CONNECTION
Your Max Caddy furnace is equipped with a servomotor. To install it, simply screw it in place in the two pre-drilled holes
in the front of the furnace using two screws as shown below.
Once installed, install the chain linking the servomotor with the air inlet damper as shown above. The chain must have
a set of 1/8". When there is no call for heat, the air inlet damper must be completely closed and the chain must be
hooked to the servomotor at the "8 o'clock" position.
20
Hide quick links:
Advertisement
Table of Contents
