Table of Contents
Advertisement
11.2. SYSTEM CONFIGURATION
Once the installation is complete and before using the unit, the furnace should be configured to activate all applicable
functions depending on options chosen. To do this, it is important to know which options are installed on your furnace.
11.3. TOUCH SCREEN
The LCD control is an electronic visual display as well as a touch screen that will light-up as you touch any location on
the display area. The main status page will then display different icons layout depending if the furnace is on or not.
Main menu – Furnace « ON »
11.3.1. ICONS DESCRIPTION
Icons
Description
Wood heating
Green : Heating mode
Yellow : Auxiliary heating mode
Heat pump
Green : Unit on
Yellow : On hold
Settings
Temperature in the hot air plenum
Possible states of the furnace:
HEAT: When the word HEAT is green, the furnace is in heating mode. If the furnace is waiting for a
demand for heating, the word HEAT is written in yellow.
COOL: When the word COOL is green, the furnace is in cooling mode. If the furnace is waiting for a
demand for cooling, the word COOL will be written in yellow.
OFF: The furnace is stopped.
Main menu – Furnace « OFF »
Icons
Description
Electrical Element
Green : Unit on
Yellow : On hold
Oil unit
Green : Unit on
Yellow : On hold
Displayed when an auxiliary heat source
has been selected.
Distribution blower is in circulation
mode. (CIRC)
33
Hide quick links:
Advertisement
Table of Contents
