GRAUPNER mc-16 Programming Manual page 75

Copy fl ight phase
Select the "Copy fl ight phase" sub-menu with the 
selection keys of the left or right four-way button then
tap on the SET key.
Erase model
Copy model–>model
Expor t to SD
Impor t from SD
Copy flight phase
Note:
Attention!
Switch-OFF
the Receiver first!
If this message appears, there is an active telemetry
link to a receiving system. Turn off this and wait until
the display is briefl y automatically hidden afterward.
In the "Copy fl ight phase" sub-menu ...
Copy from phase:
1 2
3 4
5 6
7
... the fl ight phase to be copied (1 ... 7 for fi xed-wing
models or 1 ... 6 for helicopter models) is selected with
the selection keys of the left or right four-way button
then confi rmed with a brief tap on the
right four-way button. In the next window to appear ...
Copy to phase:
1
3
5
7
=>
=>
=>
... a destination must be selected and it must be con-
=> =>
fi rmed too. Another confi rmation request will follow:
=> =>
1 Normal
A NO response will cancel the process and return the
screen to the originating screen. If the  YES response
is selected and confi rmed with a tap on the
then the selected source model will be imported into
the selected destination model memory.
=>
=>
SET key of the
2
4
=>
6
=>
Phase to:
2 Launch
to be copied?
NO YES
SET key
Program description - Copy / Erase 75