Info Display - GRAUPNER mc-16 Programming Manual

Info display

Transmitter ID, date, time and memory card
This option is available on both transmit-
mc
ter types.
16 20
Use the selection keys on the left or right
 
four-way button to scroll to the menu op-
tion »Info display« menu option in the multi-function
menu:
MP3 player
Basic settings
Ser vo display
Ser vo test
Code lock
Info display
Tap briefly on the centre SET key of the right four-way
button to open this menu option:
RFID ABCDEF12
fir mware ver.
date 2012/07/01(SUN)
time 11:22:33s
SD-Card
available
Transmitter-specific information is shown in this menu
and – insofar as necessary and beneficial – can also be
changed.
Programming procedure
Select the appropriate line with the  selection keys
of the left or right four-way button then briefly tap on
the centre SET key of the right four-way button. The
given default value in the value field displayed in in-
verse video can now be changed – insofar possible and
necessary – with the selection keys of the right four-way
button followed by another tap on the centre
or the central ESC key of the right four-way button to
conclude the entry.
278 Program description - Info display
RFID
RFID
firmware ver.
date
time
SD-Card
The RF identification number of the transmitter is
shown in this line. It is transmitter-specific, is only is-
sued once per transmitter and cannot be changed.
During the connection process, this is sent to the re-
ceiver, among other things, so that it is always capable
of identifying the radio signals of "its" transmitter.
Firmware version
RFID
1.234
firmware ver.
date
time
0MB
SD-Card
0MB
0%
The current version number of the transmitter software
is shown in this line.
At the time these instructions were revised, you can
decide whether a current update of the transmitter's
operating system is available by comparing the num-
ber displayed here with the information offered on the
Internet using the link http://www.graupner.de/en/
supportdetail/4d589f17-24b4-4e50-97d2-13a0f39b-
d13d. If the link does not work, the same information
can be obtained by working through www.graupner.de
=> "Service & Support" => "Update and revision his-
tory for Graupner HoTT components".
SET key
If applicable, the version number is also required for
inquiries with the service department.
Date
ABCDEF12
1.234
2012/07/01(SUN)
11:22:33s
0MB
If necessary, select this line with the selection keys
of the left or right four-way button and, as necessary,
select the month or date field. After activating the
respective value field with a tap on the centre
of the right four-way button, the year, month or day
can be set with the selection keys of the right four-way
button. Another tap on the centre
four-way button will close the given entry. Years ranging
from 2000 through 2135 are available for selection.
ABCDEF12
The abbreviated day of the week to the right outside in
1.234
2012/07/01(SUN) brackets is automatically generated from the respective
11:22:33s
date.
0MB
Notes:
•
•
RFID ABCDEF12
fir mware ver. 1.234
date 2012/07/01(SUN)
time 11:22:33s
SD-Card
SET
If the transmitter is connected to a PC as
described on page 50, the date and
time can also be set through the PC pro-
gram provided for the respective product via the
Internet page at www.graupner.de.
The date and time are protected against data loss
due to power failure by a buffer battery for situa-
tions like a battery change, see page 20.
0MB
SET key
key of the right