GRAUPNER mc-16 Programming Manual page 178

the ailerons with less of a deflection, i. e. the mixer ratio
should be smaller than 100 %.
The adjustment range of -150 % to +150 % means the
direction of deflection can be adjusted, depending on
the direction of rotation of the servos, to suit the ailer-
ons.
A simultaneous tap on the  or  keys of the right
four-way button (CLEAR) will reset the given active (in-
verse video) field to its default value shown in the figure.
Ail-tr
Note:
Suppressed by "2AIL 1FL".
AI +100%
Ail-tr +100%
Diff.
fl.pos
normal
AILE
AI
Ail-tr
Diff.
fl.pos
normal
FLAP
In this line, you specify the percentage rate with which
aileron trim is to affect "AILE", "FLAP" and – if pre-
sent – "AILE2" and/or "FLAP2".
The available range of values is -150 % to +150 %, rela-
tive to the adjustment range of the trim lever.
A simultaneous tap on the  or  keys of the right
four-way button (CLEAR) will reset the given active (in-
verse video) field to its default value shown in the figure.
178 Program description - Wing mixers
Diff.
Note:
With "2AIL 1FL", at one level higher in the
»Wing mixers« menu, see figure on page
174.
(Aileron trim)
0%
0%
On this line, you set the aileron differential, plus the
differential for the FLAP and FLAP2 wing flaps – if the
0%
latter are being activated as ailerons.
0%
0%
AI
0%
If you are unsure about the meaning of differ-
ential travel, please read the appropriate expla-
nation at the start of this section on page
(Differential for aileron function)
AI
+100%
Ail-tr +100%
Diff. 0%
fl.pos 0%
normal
AILE
AI 0%
Ail-tr 0%
Diff. 0%
fl.pos 0%
normal
FLAP
FL
FL2
AI
FL
FL2
0% (normal)
50% (differential)
100% (split)
168.
The setting range of -100 % to +100 % permits correct
differentiation direction adjustment regardless of the
direction of rotation of aileron and flap servos.
A simultaneous tap on the  or  keys of the right
four-way button (CLEAR) will reset the given active (in-
verse video) field to its default value shown in the figure.
fl.pos.
AI +100%
Ail-tr +100%
Diff.
fl.pos
nor mal
AILE
AI
Ail-tr
Diff.
fl.pos
nor mal
FLAP
Here, you set the flight phase-specific wing flap posi-
tions for all of the flaps present on the model in ques-
tion. In this way, you can specify the flap positions that
apply to each flight phase.
The adjustment range of -100 % to +100 % makes it
possible to set the correct direction of travel regard-
less of the direction of rotation of the aileron and flap
servos.
A simultaneous tap on the  or  keys of the right
four-way button (CLEAR) will reset the given active
(inverse video) field to its default value shown in the
figures.
(Flap position)
0%
0%
0%
0%
0%
0%