Basic Connection For Standard Models; The Four-Channel Unit - GeoVision GV-LX4C3D1 User Manual

3.1 Basic Connection for Standard Models

The following instructions describe the basic connection to the GV-Compact DVR V3.

3.1.1 The Four-Channel Unit

1. Use the supplied power adaptor to connect to power.
2. Connect to cameras by using the blue connectors of the supplied D-Type Video Cable.
3. Connect to microphones and a speaker by using the supplied D-Type Audio/TV/Spot
Monitor Cable. Connect microphones to the four white connectors of the cable, and a
speaker to the red connector.
4. Connect video output. There are two options:
• Using the black connector (QUAD) of the supplied D-Type Audio/TV/Spot Monitor
Cable, connect to a TV monitor.
• Using the VGA cable supplied by the monitor manufacturer, connect to a VGA
monitor (as illustrated in the figure).
5. Use the standard RJ-45 cable to connect the unit to the network.
Note:
1. To set the video resolution on the VGA monitor, see VGA SETTINGS, 4.8.4 Display
Settings.
2. The GV-Compact DVR V3 cannot work with the microphone that acquires power from the
unit. Use the microphone that has external power supply.
1
2
Figure 3-1
4
3
Getting Started
3
5
Internet
27