Basic Connection For Standard Models - GeoVision GV-LX4C3D1 Quick Start Manual

3
Connecting the GV-Compact DVR V3

Basic Connection for Standard Models

The 4-Channel Unit
1
2
The 8-Channel Unit
Internet
5
1
2
Cameras
1-5
5
Internet
3 4
4
3
2
Cameras
6-8
1. Connect to power by using the supplied power adaptor.
2. Connect to cameras.
● 4-Ch: Using the blue connectors of the supplied D-Type Video Cable, connect
to cameras.
● 8-Ch: Using the blue connectors of the supplied 1 to 5 D-Type Video Cable,
connect to cameras 1 to 5. Using the blue connectors of the supplied 6 to 8
D-Type Video/TV/Spot Monitor Cable, connect to cameras 6 to 8.
3. Connect to microphones and a speaker.
● 4-Ch: Using the supplied D-Type Audio/TV/Spot Monitor Cable, connect
microphones to the four white connectors and a speaker to the red connector.
● 8-Ch: Using the supplied D-Type Audio Cable, connect microphones to the
eight red connectors and a speaker to the white connector.
4. Connect video output. There are two options:
A. 4-Ch: Using the black connector (QUAD) of the supplied D-Type
Audio/TV/Spot Monitor Cable, connect to a TV monitor.
8-Ch: Using the black connector (QUAD) of the supplied 6 to 8 D-Type
Video/TV/Spot Monitor Cable, connect to a TV monitor.
B. Using the VGA cable supplied by the monitor manufacturer, connect to a VGA
monitor (as illustrated in the figure).
5. Connect to the network by using the standard RJ-45 cable.
Note: The GV-Compact DVR V3 cannot work with the microphone requiring
power from the unit. Use the microphone that has external power supply.
For details on looping video out on monitors and displaying each video sequentially
on a spot monitor, see Connecting Optional Video Output Devices, Chapter 3 in the
Compact DVR V3 User's Manual on the software DVD.
For details on installing the hard drive, see Installing Hard Drive, Chapter 3 in the
Compact DVR V3 User's Manual on the software DVD.