Connecting Anti-Vibration Acc Models; Connecting And Testing - GeoVision GV-LX4C3D1 User Manual

3.3 Connecting Anti-Vibration ACC Models

You need to connect the Anti-Vibration ACC model to the ACC wire and power wire on the
vehicle. Before real deployment, it is suggested to test connection to the ACC wire and set up
the unit.

3.3.1 Connecting and Testing

Before you connect the Anti-Vibration ACC model to a vehicle, it is recommended to test and
set up the unit first by using the supplied Shorting Cable. The Shorting Cable is designed to
simulate the ACC wiring between the unit and the vehicle. For the test, you need to prepare a
power adaptor (DC 12V, 5.0A) to power on the unit. Follow the steps below.
Items required for testing:
Supplied Shorting Cable
Power Adaptor of DC 12V, 5A (which can be purchased from GeoVision)
Getting Started
3
31