Monitoring - GeoVision GV-LX4C3D1 User Manual

6.4 Monitoring

You can start recording manually, by schedule or by input trigger.
[Manual] Manually activates recording and I/O monitoring. Select one of the following options
and then click the Start button.
Select all: Manually starts recording and I/O monitoring as well.
Camera x: Manually starts recording. Select the desired camera(s) and the recording
mode for recording.
Input: Manually starts I/O monitoring. When the input is triggered, its associated camera
and output will also be activated for recording and alerting. For input settings, see 6.2.1
I/O Control.
[Schedule] The system starts recording and I/O monitoring based on the schedule you set.
For schedule settings, see 6.5 Recording Schedule.
[Start monitoring by Input X] Starts monitoring by the assigned input. When the assigned input is
triggered, the system will respond based on your recording or I/O monitoring settings in above Manual
or Schedule options.
[Stop monitoring by Input X] Stops monitoring by the assigned input. When the assigned input is
triggered, the system will stop monitoring.
Remove HDD: Detaches the hard disk from the system when the unit stops monitoring.
Figure 6-26
Remote Configurations
6
151