Snmp Setting - GeoVision GV-LX4C3D1 User Manual

6.7.7 SNMP Setting

The Simple Network Management Protocol (SNMP) allows you to monitor the status of the
camera through SNMP network management software.
1. Select Enable SNMPv1 SNMPv2c to enable the function.
2. To enable access to Read/Write community, type a community string. This will serve as
a password to allow read and write access to the camera from the SNMP software.
3. To enable Read only community, type a community string to allow read-only access to
the camera from the SNMP software.
4. For a more secured connection, select Enable SNMPv3 to enable SNMP version 3.
5. To enable access to SNMPv3 Read/Write community, type a community string.
6. Select an Authentication Type to use for SNMP requests.
7. Type the Authentication Password and Encryption Password. You will need to type
these passwords in the SNMP software to be able to access the camera.
8. To enable access to SNMPv3 Read only community, follow steps 5 to 7.
9. Click Apply to save the settings.
Figure 6-35
Remote Configurations
6
169