6.1.4 Visual Automation
Note for eight-channel GV-Compact DVR V3, this function can only be applied to channel 1
to 4.
This intuitive feature helps you automate any electronic device by triggering the connected
output device. When you click on the image of the electronic device, you can simply change
its current state, e.g. light ON.
1. Select the Enable option.
2. Drag an area on the image of the desired electronic device. This dialog box appears.
Figure 6-7
3. Assign the connected module and output device. In the Note field, type a note to help you
manage the device. Click OK to save the settings.
4. To change the frame color of the set area, click the Set Color button.
5. To emboss the set area, select Float Up; or keep it flat by selecting Normal.
6. Click the Save Set button to apply the settings.
To perform the function, see 5.3.14 Visual Automation.
126
Figure 6-6