Privacy Mask - GeoVision GV-LX4C3D1 User Manual

4.1.9 Privacy Mask

You can set up the Privacy Mask to block out sensitive areas from view by covering the areas
with black or white boxes in both live view and recorded clips.
STATE: Enable the Privacy Mask function.
MASK MODE: Set the mask to be black or white.
HORIZONTAL START: Set the value from 1 to 17 to define where the Privacy Mask starts
horizontally. The value 1 is at the top; the value 17 is at the bottom.
HORIZONTAL END: Set the value from 1 to 17 to define where the Privacy Mask ends
horizontally. The value 1 is at the top; the value 17 is at the bottom.
VERTICAL START: Set the value from 1 to 11 to define where the Privacy Mask starts
vertically. The value 1 is at the left; the value 11 is at the right.
VERTICAL END: Set the value from 1 to 11 to define where the Privacy Mask ends
vertically. The value 1 is at the left; the value 11 is at the right.
60
Figure 4-13