Video And Audio Configuration; Remote Configuration; Camera Name Display - GeoVision GV-LX4C3D1 User Manual

5.3.7 Video and Audio Configuration

You can enable the microphone and speaker for two-way audio communication and adjust the
audio volume. To change audio configuration, click the Show System Menu button (No. 12,
Figure 5-6), and select the Audio Configure tab.

5.3.8 Remote Configuration

You can view the connection status of the central monitoring stations and upgrade firmware
over the network. Click the Show System Menu button (No. 12, Figure 5-6), and select
Remote Config. The Remote Config dialog box will appear.
[Status] In this tab, you can see the current status of the connection to Center V2 and VSM.
[Firmware Upgrade] In this tab, you can upgrade the firmware over the network. For details,
see Chapter 8 Advanced Applications.

5.3.9 Camera Name Display

To display the camera name on the image, click the Show System Menu button (No. 12,
Figure 5-6), and select Show Camera Name.
Remote Viewing Using a Web Browser
5
Figure 5-12
111