Vsm - GeoVision GV-LX4C3D1 User Manual

4.3.4 VSM

After a motion or an I/O triggered event, the central monitoring station VSM can get notified by
text alerts. For the monitoring through VSM, you must already have a subscriber account on
VSM.
You can connect up to two VSM servers for central monitoring. Press CH1 and CH2 buttons
on the Remote Control for two different connection settings.
ACTIVATE LINK: Enable the monitoring through VSM for alert events.
HOSTNAME/IP: Enter the host name or IP address of VSM.
PORT: Enter the port matching the Port 2 on VSM. Or keep the default value 5609. Refer
to 11.2 VSM.
USER NAME: Enter a valid user name to log into VSM.
PASSWORD: Enter a valid password to log into VSM.
Using the Web interface, you can set up the connection schedule. For more information and
features of the VSM connection, see 6.3.4 VSM of the Web-based configuration.
.
OSD Menu Configurations
4
Figure 4-21
69