Turning On / Off The Power; Turning On The Power; Turning Off The Power - GeoVision GV-LX4C3D1 User Manual

3.6 Turning On / Off the Power

3.6.1 Turning On the Power

1. Connect the GV-Compact DVR V3 to the power, and the Power LED should turn on. If a
HDD is installed on the GV-Compact DVR V3, the HDD Power LED should turn on as
well.
2. The system starts initializing for several seconds. After this, the Ready LED will turn to
green and the main screen will be displayed.
If the GV-Compact DVR V3 is connected to the ACC wire of the vehicle, the unit will
automatically start after you power on the vehicle for 5 seconds. Power is supplied to the unit
as long as the vehicle ignition is on.

3.6.2 Turning Off the Power

Before unplugging the power cable, ensure both the HDD LED and HDD Activity LED turn off;
otherwise, the recorded video may be lost.
If the GV-Compact DVR V3 is installed in a vehicle, the unit will automatically turn off after you
power off the vehicle for 30 seconds. During the 30 seconds, the GV-Compact DVR V3 will
stop recording and the hard drive will be removed from the system automatically.
Note: You could extend the power-off delay time from 0 to 30 minutes, refer to 6.8.7. ACC
Settings.
Getting Started
3
45