Table of Contents
Advertisement
Chapter 3 Getting Started
3.1 Basic Installation
This section describes all the equipments required to program and operate the GV-Tower
DVR/NVR/VMS System V2. Here we use GV-Tower DVR System V2 as the example.
1. There are three ways to connect the monitor to the GV-Tower DVR/NVR/VMS System V2.
•
Using the VGA cable supplied by the monitor manufacturer, connect the VGA
monitor.
•
Using the DVI-D cable supplied by the monitor manufacturer, connect the DVI-D
monitor.
•
Using the HDMI cable supplied by the HDTV manufacturer, connect the HDTV.
2. Using the supplied power cord, connect one end to the AC input and the other end to the
power outlet.
3. Connect speakers to the Audio Line Out port.
Figure 3-1
Getting Started
3
9
Advertisement
Table of Contents
