Motion Detection - GeoVision GV-LX4C3D1 User Manual

4.1.3 Motion Detection

Motion detection is used to generate an alarm whenever movement occurs in the video image.
You can configure up to 8 areas of different sensitive values for motion detection.
1. Select MOTION DETECTION. This screen appears. The default sensitivity value is 2 for
the whole area.
2. To start motion detection settings, press the
3. To clear the default settings, press the Stop button. The message "NO BOXES EXIST"
appears.
4. To define one detection area in the image, press the
54
Figure 4-4
button.
Figure 4-5
button.