Channel Settings; Channel Name - GeoVision GV-LX4C3D1 User Manual

4.1 Channel Settings

In Channel Settings, you can adjust the device settings for each channel.
To set up a channel, press the Menu button on the Remote Control, select CHANNEL
SETTINGS, press one Channel button (CH1 – CH4 for the four-channel unit; CH1 – CH8 for
the eight-channel unit), and select one of the setting options. These setting options are
described in the following.

4.1.1 Channel Name

Enter a descriptive name for the channel by using the on-screen keypad. Select OK from the
on-screen keypad to save your settings.
Figure 4-2
52