Backup Center - GeoVision GV-LX4C3D1 User Manual

To enable the Backup Center connection:
1. Activate Link: Enable the connection to the Backup Center.
2. Host Name or IP Address: Type the host name or IP address of the Backup Center.
3. Port Number: Match the communication port on the Backup Center. Or keep the default
value 30000.
4. User Name: Type a valid user name to log into the Backup Center.
5. Backup Video: Select the cameras that you want to back up their recordings to the

Backup Center..

6. Compact Video: Select the cameras that you only want to back up their Key Frames to
the Backup Center, instead of full recordings. This option is useful to save the backup
time.
7. Resend all files: Select this option to send all the recorded files that have received by the
Backup Center again.
8. Password: Type a valid password to log into the Backup Center.
9. Enable Schedule Mode: Enable the Backup Center connection on the schedule you set
in the Select Schedule Time section. Refer to 6.5 Recording Schedule for the same
settings.
10. Click Apply. The Connection Status should display "Connected" and connected time.
If the Backup Center has a failover server providing the uninterrupted backup services in case
of the Backup Center failure, you can configure the connection to the failover server.
1. Set Update Frequency: Once the GV-Compact DVR V3 is disconnected from the Backup
Center for the specified time, the GV-Compact DVR V3 will be directed to the failover
server.
2. Automatic Failover Support: Enable the automatic connection to the failover server
once the connection between GV-Compact DVR V3 and Backup Center is interrupted for
the specified time.
3. Host Name or IP Address: Type the host name or IP address of the failover center.
4. Port Number: Match the communication port on the failover server. Or keep the default
value 30000.
5. User Name: Type a valid user name to log into the failover server.
6. Password: Type a valid password to log into the failover server.
7. Click Apply.
146