Umts Settings - GeoVision GV-LX4C3D1 User Manual

4.7.5 UMTS Settings

After a mobile broadband device (supporting UMTS, HSDPA and etc) is attached to the USB
port on the GV-Compact DVR V3 and the UMTS function is enabled, the GV-Compact DVR
V3 can have Internet connectivity. For the supported mobile broadband devices, see
Appendix B.
STATE: Enable the UMTS function.
PIN NUMBER: Enter the PIN number that is provided by your network operator.
APN: Enter the Access Point Name (APN) that is provided by your network operator.
USERNAME: Enter a valid username to enable the UMTS service from your network
operator.
PASSWORD: Enter a valid password to enable the UMTS service from your network
operator.
MTU: Enter the Maximum Transfer Unit (MTU). The default vale is 1500.
IP Address: The IP address of the GV-Compact DVR V3 will be displayed after the
UMTS service is enabled. The next time when you want to log in the GV-Compact DVR
V3, you need to enter the IP address into your browser. If you use the UMTS connection
with dynamic IP addresses, it is highly suggested to enable the DDNS function that links
a domain name to the unit's changing IP address. For details on DDNS, see 4.7.6 DDNS
Settings.
Also see 6.7.4 UMTS/ZigBee of the Web-based configuration which provides more
information and features of the UMTS connection.
86
Figure 4-37