Lenses; Lens Cleaning Procedure - Barco GRAPHICS 6300 Owner's Manual

Lenses

B
LENSES

Lens Cleaning Procedure

To minimize the possibility of damaging the optical coating or scratching exposed lens surface, we have developed recommendations for
cleaning the lens. FIRST, we recommend you try to remove any material from the lens by blowing it off with clean, dry deionized air. DO
NOT use any liquid to clean the lenses.
A Toraysee cloth is included with the lens kit.
TM
Proceed as follows :
1. Always wipe lenses with a CLEAN Toraysee cloth.
TM
2. Always wipe lenses in a single direction. Do not wipe back and forwards across the lens surface as this tends to grind dirt into the coating.
3. Do not leave cleaning cloth in either an open room or lab coat pocket, as doing so can contaminate the cloth.
4. If smears occur when cleaning lenses, replace the cloth. Smears are the first indication of a dirty cloth.
5. Do not use fabric softener when washing the cleaning cloth or softener sheets when drying the cloth.
6. Do not use liquid cleaners on the cloth as doing so will contaminate the cloth.
Order number for a new Toraysee cloth : R379058.
TM
Other lenses can also be cleaned safely with this Toraysee TM cloth.
B-1
5975879 BARCOGRAPHICS 6300 14072000