Xerox 700 Digital Color Press User Manual page 159

Xerox 700 Digital Color Press
Code
User Guide
Downloaded From ManualsPrinter.com Manuals
Cause/Remedy
Cause: An error occurred in the document feeder.
Remedy: Reprocess the job.
Cause: When scanning a mixed size document using the 2 sided simultaneous scan
feature with400, or 600dpi, an error occurs.
Remedy: Decrease [Scan Resolution] to [300dpi] or less, and rescan.
Cause: An incompatible combination of features are specified in the document scan
conditions.
Remedy: Check the selected options.
Cause: The paper size of the tray selected for auto tray is different from the paper size
of the tray selected for Auto Repeat.
Remedy: Change the paper size for the tray, or change the [Paper Type Priority]
settings.
Cause: An error occurred when reading the Gradation Adjustment Chart.
Remedy: Place the Adjustment Chart properly on the document glass.
Cause: When enlarging/reducing a scanned document to the specified paper size, the
reduction/enlargement ratio value exceeds the allowed range.
Remedy: Take one of the following actions:
• Manually enter a reduction/enlargement ratio.
• Change the paper size.
Cause: An error occurred in the document feeder.
Remedy: Power-cycle the machine. Contact your Xerox Customer Support Center.
Problem Solving
8-25