Jam Clearance; Hcs Entrance Jams (E1, E2, And E3); Hcs Transport Jams (E4, E5, And E6) - Xerox 700 Digital Color Press User Manual

Xerox 700 Digital Color Press

Jam clearance

If a jam occurs, the machine stops printing and a message is displayed on the User Interface (UI). Follow all
instructions displayed completely and in the sequence shown.

HCS Entrance Jams (E1, E2, and E3)

Perform the following steps to clear the HCS Entrance jam and resume printing.
Open the HCS Front Cover.
Follow the instructions located inside the Front Cover to
clear the E1, E2, or E3 jam.
Lift the green handle and/or rotate the green knob and
remove all paper in the entrance area.
Close the green handle.
Close the HCS Front Cover.
If the UI indicates there is a jam in the digital press,
follow the instructions on the screen to remove any paper
in the area indicates. Refer to the Jam Clearance section
in the Problem Solving chapter in this manual.
Follow the instructions displayed on the digital press UI
to resume printing.

HCS Transport Jams (E4, E5, and E6)

Perform the following steps to clear the HCS Transport jam and resume printing.
Open the HCS Front Cover.
Follow the instructions located inside the Front Cover to
clear the E4, E5, or E6 jam.
Lift the green handle and/or rotate the green knob and
remove all paper in the transport area.
Close the green handle.
Close the HCS Front Cover.
If the UI indicates there is a jam in the digital press,
follow the instructions on the screen to remove any paper
in the area indicates. Refer to the Jam Clearance section
in the Problem Solving chapter in this manual.
Follow the instructions displayed on the digital press UI
to resume printing.
User Guide
Downloaded From ManualsPrinter.com Manuals
Addendum
10-11