Jam Clearance; Interface Module Jams; Basic Troublshooting - Xerox 700 Digital Color Press User Manual

Addendum

Jam clearance

If a jam occurs, the machine stops printing and a message is displayed on the User Interface (UI). Follow all
instructions displayed completely and in the sequence shown.

Interface Module jams

Perform the following steps to clear the Interface Module jam and resume printing.
Open the Interface Module Front Cover.
Lift the green handles and/or rotate the green knob and
remove all jammed paper and paper scraps.
Close the Interface Module Front Cover.
If the UI indicates there is a jam in the digital press,
follow the instructions on the screen to remove any paper
in the area indicates. Refer to the Jam Clearance section
in the Problem Solving chapter in this manual.
Follow the instructions displayed on the digital press UI
to resume printing.
Basic troubleshooting
When a problem occurs with your Interface Module, instructions may appear on the UI; refer to the information in this
section to help resolve the problem.
The fault code table, which starts on the following page, lists problems and suggested solutions that apply to the
Interface Module. If the problem persists after following all instructions, call your Xerox representative.
10-4
Downloaded From ManualsPrinter.com Manuals
Xerox 700 Digital Color Press
User Guide