Xerox 700 Digital Color Press User Manual page 91

Xerox 700 Digital Color Press
Program the job requirements for the first segment of the
job. Load only the first segment into the document
handler or place the segment on the glass one page at a
time. Press the Start button on the keypad.
When the first segment has finished scanning, the Copy
Status screen will appear. Remove the originals and press
the Change Settings button. Program the job
requirements for the second segment of the job. Load the
second segment into the document handler or on the
document glass and press the Start button on the control
panel. Repeat these steps until all segments of your job
have been programed and scanned.
After the last segment has been scanned, touch the Last
Original button on the touch screen to end the build job.
Select the Last Original button to continue.
The machine will complete the quantity selected.
You have completed the description of Build Job.
User Guide
Downloaded From ManualsPrinter.com Manuals
Services Job Status Machine Status
Log In/Out
Language
Dial Pause
Copy
Quantity 0 / 1
Originals 1
Black
94%
Collated
Chapter Insert
Change
Start... Separators...
Settings
Copy
0 / 1
Quantity
Originals 1
Black
94%
Collated
Chapter Insert
Change
Settings Start... Separators...
Copy
Energy Saver
Clear All
Interrupt
Stop
Start
Cancel
Last Original
Next Original
Start
Change Sample Set
Quantity...
Cancel
Last Original
Next Original
Start
Change Sample Set
Quantity...
4-49