Transfer Module And Fuser Jam Clearance - Xerox 700 Digital Color Press User Manual

Problem Solving

Transfer Module and Fuser Jam Clearance

This section describes how to clear paper jams that occur in the
Transfer Module and Fuser area.
1. Open the Bottom Right Cover and tear off Lead Edge of
any jammed sheet. Also, clear any jammed sheets from
the Bypass (Tray 5) feeder. Then, open the Front Door.
2. Turn Handle 2 to the right until it is in the horizontal
position, then pull out the transfer module.
3. Warning: Never touch a labeled area (found on the fuser
unit or nearby) indicating "High Temperature" and
"Caution". You may get burned.
Remove the visible jammed paper.
After clearing the jammed sheet, check to see that no
4.
torn paper pieces are left in the machine and then run 5
blank sheets to clean left over toner from the Fuser roll.
8-4
Downloaded From ManualsPrinter.com Manuals
Xerox 700 Digital Color Press
User Guide