Optional Finishing Accessories - Xerox 700 Digital Color Press User Manual

Xerox 700 Digital Color Press

Optional finishing accessories

Advanced Finisher
Professional Finisher (with
Booklet Maker)
High Capacity Stacker
(HCS)
Interface Module
User Guide
Downloaded From ManualsPrinter.com Manuals
• Top Tray capacity: 500 sheets
• Stacker Tray: 3000 sheets
• Paper weights: 52-216 gsm uncoated to Top and Stacker Trays; 217-280 gsm
uncoated to Top Tray only
• Stapling: 50-sheet, multi-position
• Hole Punching: 2- and 3-hole punch for USA and 2- and 4-hole punching for
Europe
• Top Tray capacity: 500 sheets
• Stacker Tray: 1500 sheets
• Paper weights: 52-216 gsm uncoated to Top and Stacker Trays; 217-280 gsm
uncoated to Top Tray only
• Stapling: 50-sheet, multi-position
• Hole Punching: 2- and 3-hole punch for USA and 2- and 4-hole punching for
Europe
• Booklet Tray:
• Up to 20 sets accepted in the Booklet Tray
• Stapled: 15 sheets/set (up to 90 gsm of uncoated stock)
• Non-stapled: 5 sheets/set
• Bi-Fold: 1 sheet/set (up to 169 gsm of uncoated stock)
• Stackable number of sets depends on paper size
• Top Tray capacity: 500 sheets
• Stacker Tray Capacity: 5000 sheets
• Paper weights: 52-300 gsm uncoated; 105-220 gsm coated
• Paper sizes: 4 x 5.6 in./102 x 142 mm to 13 x 19 in./SRA3/330 x 488 mm to Top
Tray; 7.2 x 10.5 in./182 x 257 mm to 13 x 19 in./SRA3/330 x 488 mm to Stacker
Tray
The Interface Module (IM) acts as a communication device and paper path between
the print engine and an optional finishing device such as the HCS or the Light
Production C Finisher (refer to next page for more information on this finisher). One IM
is required when using an optional HCS or optional Light Production C Finisher.
Specifications
9-3