Other Faults - Xerox 700 Digital Color Press User Manual

Xerox 700 Digital Color Press

Other Faults

This section contains a problem-solving table to help you locate and resolve a problem. Locate the defect in the
Problem column and perform the task in the Corrective Action column.
Problem
The machine does not
successfully complete
a copy job.
The machine does not
successfully complete
a print job.
User Guide
Downloaded From ManualsPrinter.com Manuals
Corrective Action
Check that your machine is switched on. The screen on the control panel window should
contain some information, or the Power Saver light should be illuminated.
Ensure that the power cable is connected to the machine and to a suitable power socket.
When you have connected the power cable press the ON/OFF button.
Is your machine connected on the network as a printer? Try printing a test page from your
workstation to the machine to verify that the printer is connected on the network.
Try selecting the Network Scanning button. If the Network Scanning button is showing but
it is grayed out and non-selectable try switching the machine off by pressing the Power
On/Off button. Wait for two minutes then press the Power On/Off button to restart the
machine.
Network Scanning is not installed on your machine. Scanning options are available from
your Xerox Sales Representative.
Your machine may not be configured on the network. Contact your System Administrator
to connect the machine to the network.
Problem Solving
8-43