Xerox 700 Digital Color Press User Manual page 170

Problem Solving
Code
8-36
Downloaded From ManualsPrinter.com Manuals
Cause/Remedy
Cause: Attempted to command a job flow to a print document. Print documents are not
supported by job flows.
Remedy: Check the document before starting the job flow.
Cause: When following the job flow, an error occurred.
Remedy: Check the settings for the job flow.
Cause: PDL (Printer Description Language) error detected by the controller while
processing a network print job.
Remedy: Cancel and resend the print job. If problem continues, reboot both the controller
and the printer and resend job. If the problem persists, call the Customer Support Centre
for further help/instructions.
Cause: Disk full error message on the controller.
Remedy: Cancel job. Delete unwanted files from the controller. Resend the network print
job.
Cause: An error occurred with the Offset Catch Tray (OCT).
Remedy: Power off/on the machine. If the machine is not improved by performing the
relevant remedy, contact your Xerox Customer Support Center.
A communication error has occurred with the Finisher.
Remedy: Power off/on the machine. If the error continues, contact your Xerox Customer
Support Center.
Xerox 700 Digital Color Press
User Guide