Mitsubishi Electric GOT2000 Series Connection Manual page 308

14.3 GOT Side Settings
14.3.1 Setting communication interface

Controller setting
Set the channel of the equipment to be connected to
the GOT.
2.
1.
Select [Common]
menu.
2.
The Controller Setting window is displayed. Select the
channel to be used from the list menu.
3.
Set Manufacturer, Controller Type, I/F, and Driver
according to the connected equipment to be used.
4.
The detailed setting is displayed after Manufacturer,
Controller Type, I/F, and Driver are set.
Make the settings according to the usage
environment.
Click the [OK] button when settings are completed.
POINT POINT POINT
The settings of connecting equipment can be set and
confirmed in [I/F Communication Setting]. For details,
refer to the following.
1.1.2 I/F communication setting
14 - 4
14. RFID CONNECTION
14.3 GOT Side Settings
Click!
[Controller Setting] from the

RFID setting
3.
4.
1.
Select [Common]
from the menu.
2.
Set the interface to which the RFID controller is
connected.
3.
Check the [Use RFID] to set the function. For details
on the function setting, refer to the following manual.
GT Designer3 (GOT2000) Help
4.
Clicking the detail setting button displays the
Communication Detail Settings dialog box for each
communication driver.Make the settings according to
the usage environment.
14.3.2 Communication detail settings
Click the [OK] button when settings are completed.
POINT POINT POINT
(1) Communication interface setting
When Channel No.8 is used, the following external
devices, which use Channel No.8, cannot be
connected at the same time.
• Barcode reader that requires the power supply
When connecting the above-mentioned devices at
the same time, set [RFID] to Channels No. 5 to 7.
(2) Setting for the driver
To Channels No. 5 to 8, multiple [RFID] cannot be
set.
2.
Click!
3.
[Peripheral Setting]
4.
[RFID]