Connecting To Bar Code Reader - Mitsubishi Electric GOT2000 Series Connection Manual

8. BAR CODE READER CONNECTION
8.1 Connectable Model List
For connectable bar code readers and system equipment, refer to the following Technical News.
8.2 System Configuration
8.2.1

Connecting to bar code reader

Bar code reader
Connection
Bar code reader
cable 1)
*1
*1
*1
*1 For connectable bar code readers, system equipment, available bar code types and connection cables, refer to the following
Technical News.
POINT POINT POINT
When using the RS-232 communication unit
Use the RS-232 communication unit of the GOT for connecting to a barcode reader.
However, when the RS-232 communication unit is used, the power cannot be supplied to a bar code reader from
the GOT.
HINT HINT HINT
System configuration between the GOT and PLC
For the system configuration between the GOT and PLC, refer to each chapter.
8 - 2
8. BAR CODE READER CONNECTION
8.1 Connectable Model List
List of valid devices applicable for GOT2000 series (GOT-A-0064)
Connection cable 1)
Connection
cable 2)
-
-
List of valid devices applicable for GOT2000 series (GOT-A-0064)
Mitsubishi Products
Non-Mitsubishi Products 1, Non-Mitsubishi Products 2
Microcomputer, MODBUS Products, Peripherals
Connection cable 2)
Varies according to the connection type.
GOT
Option device Model
- (Built into GOT)
GT15-RS2-9P
Extended function OS
Barcode*
GOT PLC
PLC
For the system
configuration between
the GOT and PLC,
refer to each chapter.
Communication driver
Connection type
dependent
Number of
connectable
equipment
1 bar code reader
for 1 GOT