Setting The Communication Interface; Setting Connected Equipment (Channel Setting) - Mitsubishi Electric GOT2000 Series Connection Manual

1.1 Setting the Communication Interface

Set the communication interface of GOT and the connected equipment.
When using the GOT at the first time, make sure to set the channel of communication interface and the communication
driver before writing to GOT.
Set the communication interface of the GOT at [Controller Setting] and [I/F Communication Setting] in GT Designer3.
1.1.1

Setting connected equipment (Channel setting)

Set the channel of the equipment connected to the GOT.

Setting
1.
Select [Common]
2.
The Controller Setting dialog box appears. Select the channel No. to be used from the list menu.
3.
Refer to the following explanations for the setting.
POINT POINT POINT
Channel No.2 to No.4
Use the channel No.2 to No.4 when using the Multi-channel function.
For details of the Multi-channel function, refer to the following.
Mitsubishi Products 20. MULTI-CHANNEL FUNCTION
[Controller Setting] from the menu.
1. PREPARATORY PROCEDURES FOR MONITORING

1.1 Setting the Communication Interface

1
1 - 3