Connecting To Rfid - Mitsubishi Electric GOT2000 Series Connection Manual

14. RFID CONNECTION
14.1 Connectable Model List
For connectable RFID controllers and system equipment, refer to the following Technical bulletin.
Visit the Mitsubishi Electric FA Equipment Information Service website (MELFANSweb) to refer to the Technical News.
http://wwwf2.mitsubishielectric.co.jp/english/index.html
14.2 System Configuration

14.2.1 Connecting to RFID

RFID controller
RFID controller
Model name
For connectable RFID controllers and system
equipment, refer to the following Technical
bulletin.
List of valid devices applicable for
GOT2000 series (GOT-D-0064)
POINT POINT POINT
When using the RS-232 communication unit
Use the RS-232 communication unit of the GOT for connecting to an RFID controller.
However, when the RS-232 communication unit is used, the following operations cannot be supported.
(a) Using the external authentication
(b) Supplying the power to an RFID controller from the GOT
14 - 2
14. RFID CONNECTION
14.1 Connectable Model List
List of valid devices applicable for GOT2000 series (GOT-D-0064)
Connection cable
Connection cable
Varies according to
specification of RFID
controllers.
GOT
Varies according to the connection type.
GOT
Option device Model
- (Built into
GOT)
For the system
configuration
between the GOT
and PLC, refer to
each chapter.
GT15-RS2-9P
Extended function OS Communication driver
Connection type
RFID
dependent
PLC
Number of connectable
PLC
equipment
1 RFID controller for
1 GOT