Got Side Settings - Mitsubishi Electric GOT2000 Series Connection Manual

13.4 GOT Side Settings

13.4.1 Setting communication
interface

Controller setting
Set the channel of the equipment to be connected to
the GOT.
2.
1.
Select [Common] [Controller Setting] from the
menu.
2.
The Controller Setting window is displayed. Select the
channel to be used from the list menu.
3.
Set Manufacturer, Controller Type, I/F, and Driver
according to the connected equipment to be used.
4.
The detailed setting is displayed after Manufacturer,
Controller Type, I/F, and Driver are set.
Make the settings according to the usage
environment.
Click the [OK] button when settings are completed.
POINT POINT POINT
The settings of connecting equipment can be set and
confirmed in [I/F Communication Setting]. For details,
refer to the following.
1.1.2 I/F communication setting

3.
4.
Click!
1.
2.
3.
4.
Click the [OK] button when settings are completed.
Multimedia setting
2.
3.
Select [Common] [Peripheral Setting]
[Multimedia] from the menu.
Set the interface to which the multimedia controller is
connected.
Check the [Enable the setting of Multimedia] to set the
function. For details on the communication settings,
refer to the following manual.
GT Designer3 (GOT2000) Help
Clicking the detail setting button displays the
Communication Detail Settings dialog box for each
communication driver.Make the settings according to
the usage environment.
13.4.2 Communication detail settings
13. MULTIMEDIA CONNECTION
13.4 GOT Side Settings
4.
Click!
13
13 - 5