Settings for the video/RGB equipment
2.
3.
1.
Select [Common]
[Peripheral Setting]
RGB Input] from the menu.
2.
Set the interface to which the video/RGB equipment is
connected.
3.
Check the [Use Video/RGB Input] to set the function.
For details on the function setting, refer to the
following manual.
GT Designer3 (GOT2000) Help
4.
Clicking the detail setting button displays the
Communication Detail Settings dialog box for each
communication driver.Make the settings according to
the usage environment.
11.4.2 Communication detail settings
Click the [OK] button when settings are completed.
11.5 Precautions
Connecting to PC
When connecting to a PC, ground the earth wire of the
PC.
11.4.3 Setting the video/RGB function
Set the video/RGB function.
4.
For the video/RGB function setting, refer to the following
manual.
Click!
[Video/
GT Designer3 (GOT2000) Help
11. VIDEO/RGB CONNECTION
11.5 Precautions
11
11 - 9