Verifying Got Recognizes Connected Equipment - Mitsubishi Electric GOT2000 Series Connection Manual

1.5 Verifying GOT Recognizes Connected Equipment

Verify the GOT recognizes controllers on [Communication Settings] of the Utility.
• Channel number of communication interface, communication drivers allocation status
• Communication unit installation status
For details on the Utility, refer to the following manual.
1.
3.
1 - 20
1. PREPARATORY PROCEDURES FOR MONITORING

1.5 Verifying GOT Recognizes Connected Equipment

GOT2000 Series User's Manual (Utility)
4.
1.
After powering up the GOT, touch [GOT basic
set] [Controller] from the Utility.
2.
The [Communication Settings] appears.
3.
Verify that the communication driver name to
be used is displayed in the communication
interface box to be used.
4.
When the communication driver name is not
displayed normally, carry out the following
procedure again.
1.1Setting the Communication Interface