Got Side Settings - Mitsubishi Electric GOT2000 Series Connection Manual

11.4 GOT Side Settings

11.4.1 Setting communication
interface

Controller setting
Set the channel of the equipment to be connected to
the GOT.
2.
1.
Select [Common]
menu.
2.
The Controller Setting window is displayed. Select the
channel to be used from the list menu.
3.
Set Manufacturer, Controller Type, I/F, and Driver
according to the connected equipment to be used.
4.
The detailed setting is displayed after Manufacturer,
Controller Type, I/F, and Driver are set.
Make the settings according to the usage
environment.
Click the [OK] button when settings are completed.
POINT POINT POINT
The settings of connecting equipment can be set and
confirmed in [I/F Communication Setting]. For details,
refer to the following.
1.1.2 I/F communication setting
11 - 8
11. VIDEO/RGB CONNECTION
11.4 GOT Side Settings
Click!
[Controller Setting] from the
11.4.2 Communication detail settings
Make the settings according to the usage environment.
3.
4.
Item
Video Input
*1
Signal
Video
*2
Resolution
*1 When NTSC format is selected, the resolution is fixed to
640 480.
*2 For GT2710-V and GT2708-V, the resolution is fixed to
640 480.
POINT POINT POINT
(1) Communication interface setting by the Utility
The communication interface setting can be
changed on the Utility's [Communication setting]
after writing [Communication Settings] of project
data.
For details on the Utility, refer to the following
manual.
GOT2000 Series User's Manual (Utility)
(2) Precedence in communication settings
When settings are made by GT Designer3 or the
Utility, the latest setting is effective.
Description
Set the video input signal.
(Default: NTSC)
Set the video resolution.
(Default: 640 480)
Range
NTSC, PAL
640 480,
720 480,
768 576