User Sounds - 2N Helios IP Configuration Manual

5.4.7 User Sounds

The 2N
tone sequences; refer to the Signalling of Operational Statuses subsection. If you find
the standard sound signalling inconvenient, modify the sounds for the following
statuses:
You can either completely mute the above-mentioned sounds, replace them with one of
the five predefined sounds, or simply record a s
The sound file must have the WAV format and use PCM encoding with 8 kHz sampling
frequency and 8/16-bit sample resolution, and the file size may not exceed 128 kB.
The maximum file playing time is limited to approximately 16 seconds for 8-bit and 8
seconds for 16-bit resolution.
You can also play the recorded files via Automation using the Action.PlayUserSound
and, optionally, with the aid of the intercom speaker and/or directly into the phone call.
®
2N TELEKOMUNIKACE a.s., www.2n.cz
®
Helios IP intercoms provide standard signalling of operational statuses by
a. Ringing before answering call
b. Call busy tone
c. Call hang-up
d. Invalid input
e. Invalid user position
f. Switch activation
ound file of your own into the intercom.
99