2N Helios IP Configuration Manual page 26

You can assign up to three user phone numbers to each user position. In case the user
is inaccessible on one number, the following number will be dialled after a ringing
timeout. Enable the
numbers simultaneously. The phone number validity can also be time profile-limited.
Phone number – enter the phone number of the station to which the call shall
be routed. Enter the address sip:[user_id@]domain[:port] for Direct SIP calling,
e.g.:
Enter device:device_name for calls to the
the device name in the mobile application. Enter
number to specify which SIP account shall be used for outgoing calls (account 1
or 2).
Time profile – assign a time profile to each phone number to define the number
validity. If the profile in inactive, the phone number is not used and the following
phone number is dialled if defined.
Helios IP Eye address – set the address of the PC to be sent a special UDP
message on each active user phone number call. With the aid of this message,
the
users who are not provided with a display-equipped videophone. Enter the
address as follows: ip_address[:
®
2N TELEKOMUNIKACE a.s., www.2n.cz
Parallel call to following number
sip:200@192.168.22.15
®
2N Helios Eye
parameters are optional and are used in case there is Network Address
2N
application displays the camera image screen for those
port1 ][:
to enable dialling multiple
or sip:name@yourcompany
®
Helios IP Mobile application. Set
/1 or /2 behind the phone
port2 ]. The port1
.
and port2
26