2N Helios IP Configuration Manual page 34

trick to enter card IDs: tap the card on the intercom reader and find it in the Access
Log . Double-click to select the card ID and push CTRL+C. Now that you have the card
ID in your box, you can insert it with CTRL+V in any intercom setting field.
Having been read, the card ID is compared with the intercom card database. If the
card ID matches any of the cards in the database, the appropriate action will be
executed: switch activation (door unlocking, etc.). To change the switch number to be
activated, use the
enu ( 2N
ter in the
Verso
Refer to the
List of Parameters
Cards
Plus card ID – enter the service card ID for adding cards to the Installed cards:
a sequence of 6–32 characters including 0–9, A–F.
Minus card ID – enter the service card ID for removing cards from the Installed
cards: a sequence of 6–32 characters including 0–9, A–F.
Card ID – enter the access card ID: a sequence of 6–32 characters including
0–9, A–F.
Time profile – assign a time profile to the user access card to define the card
validity. If the time profile is inactive, the user access card will be detected as
invalid.
Description – enter such information as the card owner name and similar. The
®
2N TELEKOMUNIKACE a.s., www.2n.cz
Associated Switch
®
Helios IP Vario, Force, Safety
Hardware / Modules
model).
Directory / Access Cards
parameter in the
models) or the
menu of the card reader module (
menu for the access card settings.
Hardware / Card Reader
Associated Switch
®
2N Helios IP
m
parame
34