2N Helios IP Configuration Manual page 25

User switch codes
activation, e.g.). A time profile can be assigned to each code.
User cards
Enable/disable double authentication (valid user card + switch activating code)
for each user.
User activation and deactivation codes
activate/deactivate speed dial and virtual number calling. Calls to a deactivated
user are automatically forwarded to the User deputy.
Refer to the
for selecting the user positions easily and arrows for scrolling pages. Or, you can enter
the position number and push
user's name, push
List of Parameters
Position enabled – enable calling to this user position.
Name – enter the user name for the selected user position. This parameter is
optional and helps you find items in the user list more easily.
E-mail – enter the user E-mail to which information on missed or successful calls
can be sent. Refer to the E-Mail subsection for more details.
Virtual Number - number to be used for user calling via a numeric
keypad. Enable this function in the
/ Keyboard
®
2N TELEKOMUNIKACE a.s., www.2n.cz
numeric keypad and press * to start the call. This original FW 2.10 option is
no more recommended due to potential user management troubles.
– enter the switch activating user codes (door lock
– enter the user-defined access cards with/without a time profile.
Directory / Users menu for the Users settings. Use the navigation panel
to find its position.
menu.
– enter the user-defined codes to
to move to the position quickly. If you know the
Dial by Numeric Keypad in the Hardware
25