2N Helios IP Configuration Manual page 88

FTP client enabled - enable camera image saving to the FTP server.
Remote FTP server address - set the FTP server address in the
ftp://ip_address or ftps://ip_address format.
Username - set the FTP server username. The parameter is mandatory if the
FTP server requires user authentication.
Password - set a password for the above mentioned FTP server user.
Passive mode - select the passive transmission mode (as web browser).
Remote directory - set the FTP server directory to which the camera images
shall be saved.
Picture resolution - set the image resolution.
Upload pictures - set automatic picture sending to the FTP server at the call
start or after a preset time period. You can disable automatic sending
(Automation) and send pictures via Action.UploadSnapshotToFtp .
Upload period - set the picture sending period in steps (10 seconds to 30
minutes) when Upload pictures is set to Periodic .
88
®
2N TELEKOMUNIKACE a.s., www.2n.cz