2N Helios IP Configuration Manual page 100

List of Parameters
Ringing before answering call – set the sound to be played before answering
an incoming call (intercom ring tone).
Call busy tone – set the sound to be played when the called user is busy.
Call hang-up signalling – set the sound to be played upon the call end.
Invalid input signalling – set the sound to be played when an invalid code in
entered (switch/user/profile activation).
Invalid position signalling – set the sound to be played when a quick dial
button is pressed but the corresponding user position is not programmed.
Switch activation signalling – set the sound to be generated when a switch is
activated. Specify signalling details for each switch; refer to the Switches
subsection.
You can record up to 10 user sound files into the intercom and assign names to them
for convenience.
Press
dialogue window and push
sound file (locally on your PC).
®
2N TELEKOMUNIKACE a.s., www.2n.cz
to record a sound file to the intercom. Select a file from your PC via a
Record . Press to remove a file. Press to replay the
100