•
Crestron Device Name – select the device name.
•
Crestron Group List – select the group name list with comma as a separator.
•
Enable Video Multicast for Crestron panels – enable video multicast for Crestron panels,
allowing for multiple Crestron devices to receive the same video stream without wasting
the local network bandwidth.
•
Crestron Multicast Address – set the multicast address to be used for multicast video for
Crestron devices.
•
Crestron Multicast Port – set the multicast port to be used for multicast video for
Crestron devices.
•
Crestron Multicast TTL – set the Time To Live (TTL) value to be used for sending video
early media for Crestron devices.
5.4 Services
Here is what you can find in this section:
•
5.4.2 Access Control
•
5.4.2 Streaming
•
5.4.3 E-Mail
•
5.4.4 Automation
•
5.4.5 HTTP API
•
5.4.6 Integration
•
5.4.7 User Sounds
•
5.4.8 Web Server
•
5.4.9 Audio Test
•
5.4.10 SNMP
Configuration manual for 2N IP intercoms
93 / 282