Intercom Control As Viewed By External User - 2N IP Verso Installation Manual

When the static IP address is set, the following default values of the basic network parameters
are reset:
• IP address: 192.168.1.100
• Network mask: 255.255.255.0
• Default gateway: 192.168.1.1

Note
• Be sure to press the button sequence within thirty seconds after the sound signal
for security reasons. Up to 2 s intervals are allowed between the presses.

3.2 Intercom Control as Viewed by External User

Quick Dial Buttons
Press the quick dial button on the main unit to dial the first position in the phone directory
(Phone Book) depending on the model type. Use extending modules to extend the number of
quick dial buttons to up to 146.
By pressing the quick dial buttons you dial the phone numbers assigned to the particular Phone
Book position. Call setup is signalled by a long intermittent or any other tone depending on the
configuration of the PBX connected.
Installation manual 2N® IP Verso
213 / 241