2N Helios IP Configuration Manual page 30

5.2.2 Time Profiles
Such intercom functions as outgoing calls and RFID card/numeric code access, for
example, can be time-limited by being assigned a
profile you can:
block all calls to a selected user beyond the set time interval
block calls to selected phone numbers beyond the set time interval
block RFID access for a user beyond the set time interval
block numeric code access for a user beyond the set time interval
block switch activation beyond the set time interval
Assign a time profile according to a week time sheet to define availability of the
selected function. Just set from-to or days in the week on which the function shall be
available.
®
Helios IP
Cards and Switches settings.
The time profiles are defined not only using the week time sheet but also manually with
the aid of special activation/deactivation codes that you can assign to them after
arriving in/before leaving your office, for example. Enter the activation/deactivation
codes using the numeric keypad of your intercom or phone (during the intercom call).
Refer to the
Caution
®
2N TELEKOMUNIKACE a.s., www.2n.cz
®
2N Helios IP helps you create up to 20 time profiles (depending on the
model) that can be assigned to the function; refer to the Users, Access
Directory / Time Profiles
In case you use the 2N
we do not recommend you to modify the time profile settings via the web
interface.
time profile
menu for the time profile settings.
®
Helios IP Manager for intercom configuration,
. By assigning a time
2N
30