2N Helios IP Configuration Manual page 119

5.5.5 Auto Provisioning
The 2N
or automatically from a storage on a TFTP/HTTP server selected by you according to
predefined rules.
You can configure the TFTP and HTTP server address manually. The
ercoms support automatic identification of the local DHCP server address (Option 66).
Firmware
Use the
you. The intercom compares the server file with its current firmware file periodically
and, if the server file is later, automatically updates firmware and gets restarted
(approx. 30 s). Hence, we recommend you to update when the intercom traffic is very
low (at night, e.g.).
®
2N Helios IP
MODEL in the filename specifies the intercom model:
MACADDR is the MAC address of the intercom in the 00-00-00-00-00-00 format. Find
the MAC address on the intercom production plate or in the
the web interface.
Example:
®
2N TELEKOMUNIKACE a.s., www.2n.cz
®
Helios IP intercoms help you update firmware and configuration manually,
Firmware tab to set automatic firmware download from a server defined by
expects the following files:
a. hip MODEL -firmware.bin – intercom firmware
b. hip MODEL -common.xml – common configuration for all intercoms of one
model
c. hip MODEL MACADDR -
®
a. v – 2N Helios IP Vario
®
b. f – 2N Helios IP Force
®
c. sf – 2N Helios IP Safety
®
d. ak – 2N Helios IP Audio Kit
®
e. vk – 2N Helios IP Video Kit
f. ve – 2N ® Helios IP Verso
.xml – specific configuration for one intercom
®
2N Helios IP
Intercom Status tab via
119
int