Appendix A: Specifications - Safety Vision Observer 4000 User Manual

Appendix A: Specifications

SPECIFICATIONS
Embedded Real Time Linux 2.6.24
Operating System
NTSC / PAL selectable
Video Standard
4 channels
Audio/Video Inputs
Audio/Video Output 1 channel
Audio/Video Compression ADPCM / H.264
Resolution* D1, HD1, CIF
Frame Rate* 100FPS global NTSC / 120FPS global PAL
Image Quality (Bit Rate) 8 levels (1 is best)
Recording Mode Continuous (dual stream) / scheduled / event (sensor trigger, speed, acceleration,
video loss, temperature), pre/post recording
Pre-Event Recording Configurable up to 60 minutes
Post-Event Recording Configurable up to 30 minutes
Mirror Recording Yes
Built-in module (location tracking, speed detection, and time sync)
GPS (Antenna Included)
1 × Class 10 SD Card (128GB max)
Storage (lockable)
1 × Class 10 SD Card (128GB max, mirror recording)
Interfaces 1 x RS-232 and 1 x USB 2.0 (on front panel; lockable)
Sensor Inputs 4 inputs, 2 outputs
Power Input 8 - 36V DC
Power Output 12V at 500mA
Power Consumption 13.5V at 1.2A, 27V at 0.5A
Dimensions (w x h x d) 5.59in. x 2.13in. x 5.7 in. (142mm x 54.2mm x 144.8mm)
Weight 1.5 lbs. (0.7 kg.)
Operating Temperature -13°F~140°F (-25°C~60°C)
8% - 90%
Relative Humidity
CE, FCC, MIL-STD-810F
Certificates
IR remote control (included); monitor (optional)
Configuration
WITH A SAFETY VISION MONITOR
On Screen Display GPS information, event, temperature, voltage, device information, firmware version,
MCU version
1/4
Display Split
Playback 1 chan. by local monitor, 1/4 chan. with software
Search Mode Date/time, channel, event
*configurable per channel and event
OBSERVER 4000 USER GUIDE
41