Ordering The Lift Tool; World Trade Locations; United States Locations - IBM System Storage SAN384B-2 Installation, Service And User Manual

v Accessory kit containing:

Ordering the lift tool

The ordering procedures for the lift tool vary depending on your location. You
should direct questions about these procedures to your regional representative.

World trade locations

The ordering procedures are for world trade locations:
v Order the lift tool by using the parts order system, like any other part.
v Use the part numbers when you order:
v You do not record parts usage.
v Return the lift tool and the 24–inch load plate to the parts center after you

United States locations

In the United States, call UPS Logistics at 800–528–6070 to order the lift tool and
the 24–inch load plate.
Note: For the SSR branch and territory, the United States cannot order the lift tool
Use the part number when you order:
v Lift tool: PN 09P2481 (order includes 24–inch load plate: PN 11P4369 )
12
SAN384B-2 Installation, Service, and User Guide
– WWN cards and WWN bezel
– Power supplies
– Blower assemblies
– Cable management finger assemblies
– Chassis door
– Documentation CD (contains documents related to the product and Fabric
OS)
– ESD grounding strap
– USB device
– RS-232 serial cable. The RS-232 cable has an adapter at one end that can be
removed to provide an RJ-45-style connector.
– Warranty
– Safety notices
Important
The lift tool is required only when you install an additional SAN384B-2 or
when you install or remove the SAN384B-2 from the cabinet. Ensure that the
lift tool will be available on location at the time of the installation.
– Lift tool: PN 09P2481
– The lift tool will include the required 24–inch load plate: PN 11P4369
complete the installation or removal of the SAN384B-2.
or 24–inch load plate through the parts order system. UPS Logistics are used
to ship and return the lift tool and 24–inch load plate.